现接到英国彩涂板询单，具体规格、数量、要求如下：

Sub: Technical Quotation of Galvanized Steel Coil 1000MT

The Quantity is: 1000MT PPGI

Product: ASTM A 653

Thickness is: 1.24mm (including painting/coating both sides)

Width: 23.50-24.00 inches.

SS Grade: 50 (Yielding Point : 50000psi or 35kg/mm2)

Zinc Layer: Class G-90 (Z 275)

Weight of Coil: 2280-2300 kgs approximately.

Base metal : minimum carbon 0.12%

Elongation : 22%~30%

Hardness : 60~75Rb

Tolerance: +0.20mm

Color: Off white.

Backside: 12mic (polyester wash coat &epoxy primer)

Paint Type : RMP

Paint coating : Top 25mic (off white)

*Top side suitable for roll forming, with internal lubricant on primer

NCCA II-1 or ECCA T4 pencil harness HB-2H.

* NCCA standard "T" bend test method or ASTM D4 145-83(must pas

2T bend test, no pick off with scotch #610 tape)

* ECCA test to 1T is also acceptable. Coating test to ECCA T1 at every coil.

* Light wax or evaporative lubricant to be applied to exterior of paint.

Note: Lioyds test certificate will also be provided at the time of delivery.